TelecomFM - CellRoute-GPRS

CellRoute-GPRS

Technical Specification

Telephony Interface

Call Control	DTMF
Loop Current	40mA off hook (20mA on mains fail)
Line impedance	600-ohm complex
Ring Voltage	70Vrms
Ring Load	REN 4
CLIP	Bellcore FSK
Line Voltage	48V on hook (36V on mains fail)



GSM Interface

Bands	GSM 850MHz E-GSM 900MHz GSM 1800MHz GSM 1900MHz GSM Phase 2+
Transmit Power	Class 4 (2W) for E-GSM 900MHz Class 1 (1W) for GSM 1800MHz
Speech Codecs	Half Rate (ETS 06.20) Full Rate (ETS 06.10)
Data Rate	Up to 85.6 kbps via GPRS
SIM Card	3V
Antenna	Integral Omni directional Antenna with SMA connector for external antenna option



Physical Interfaces

Telephone	Analogue / RJ11 or BT603 option
Data Port	RS232 / RJ45 with DB-9 converter
GSM Antenna	Gold plated SMA male
SIM Card	3V Small card retained under rear panel
Indication	2 x LED indication for battery / Transmission Status



Approvals

CE Certification to R & TTE directive 1999/5/EC GSM Certifications:
ETS 300 607-1 Digital Cellular Telecommunications system EN 301 419-1 Global System for Mobile communication ETS 300 342-1 Radio Equipment and Systems



Power Supplies

Primary	110-240Vac @ 47-63Hz
Secondary	2 x A size NiMH rechargeable batteries with auto switch over on mains failure

Features Overview

High Ringer Equivalence POTS Interface supports up to 4 additional extensions Highly compatible POTS & PABX interface Integral Battery Back-up Bellcore Caller Line ID Presentation GSM Network features supported (subject to network support) Selectable Dial tone and Ring cadences RS232 Data port for emails/web and PC faxes SIM lock Network lock Remote Software Upgrade Off-hook howler External Antenna facility



Physical Specification

Height	150 mm
Width	122 mm
Depth	42 mm
Weight	460gm